This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.

This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for altering the scale are included with this kit.

This specially-priced model features single-layered PDFs that are ready to print right way.

This selection of buttresses, joining columns, gates, doors and wall sections is a complete wall-building kit for fantasy/medieval tabletop games. These are 2" tall walls that are 0.25" thick, perfect for the inner city. Create walls along your streets, around houses, or to close around yards and gardens. You can combine these pieces in many ways, and print as many as you require.

• Short Buttresses
• Tall Buttresses
• Joining Columns
• Large Gate Doors
• Medium Gate Doors
• Standard Doors
• Walls 1" Wide
• Walls 1.5" Wide
• Walls 2" Wide
• Walls 2.5" Wide
• Walls 3" Wide
• Walls 3.5" Wide
• Walls 4" Wide
• Walls 4.5" Wide
• Walls 5" Wide
• Walls 5.5" Wide
• Walls 6" Wide
• Walls 6.5" Wide

You'll need the free Adobe Acrobat Reader 7.0 or later in order to use these files.

Each wall piece is 2" tall and 0.25" thick. The walls are provided in widths of 1" through 6", and every half inch in between. The tall buttresses and joining columns have a footprint of 0.5" and stand 2.25" inches all. The small buttresses have a footprint of 0.5" and stand 1.75" tall. The large gate pieces are 4" wide and 2.8" tall. The medium gate pieces are 2.5" wide and 2" tall. The standard doors are 1" wide and 1.75" tall.